Evga force 780i SLI FTW Bedienungsanleitung PDF herunterladen

The following quick steps will guide you through testing the absolute bare minimum essentials of your motherboard before installing it into a system chassis.

Visual aids are provided to assist you during the following procedures.

To reduce the risk of fire, electric shock, and injury always follow basic safety precautions. It is recommended that you use electrostatic discharge (ESD)

countermeasures such as an ESD wrist strap or anti-static mat when handling computer components.

After removing the EVGA nForce 780i SLI

FTW from its packaging, place it on to a nonconductive surface. For example: wood, cardboard box, or an anti-static mat.

EVGA nForce 780i SLI

FTW Visual Guide

Unhook the socket lever and lift up the load plate. Remove the LGA 775 protective cover and carefully install your Intel processor making sure to properly align the notches.

Close the load plate and with light pressure, lower the socket lever back in to its original position.

a. b.

c. d.

a. b.

c. d.

Apply a small, pea-sized drop of thermal paste on to the middle of the processor. Install your processor heatsink and fan.

Install one stick of system memory (DIMM) in to the DIMM slot of your choice.

Plug in one keyboard into a USB port or PS/2 port.

Make sure your power supply’s power switch is in the OFF position then connect your 24-Pin ATX Power Connector

and 8-Pin CPU Power Connector to the motherboard.

On the power supply, flip the power switch to the

ON position. LEDs will now be lit on the motherboard.

Press the onboard Clear CMOS button once then press

the green Power Button to begin powering up the system.

At this final stage, you should now be greeted with the

POST screen on your monitor.

Connect one hard drive disk to either one of the SATA Connectors or to the IDE Connector

depending on the hard disk drive connection type.

SATA Connection

Power Button

IDE Connection

a. b.

c. d.

Insert your graphics card into either the PCI-E 2.0 slot or the PCI slot. The type of slot depends on the graphic card

bus type. Connect a monitor to the output connector of the graphics card.

Plug in power connectors to both the graphics card and the hard disk drive. Power connector types will vary

depending on the hard disk drive and graphic card’s power requirements.

1 2

Inhaltsverzeichnis

Seite 1 - FTW Visual Guide

The following quick steps will guide you through testing the absolute bare minimum essentials of your motherboard before installing it into a system c

Seite 2 - Step - Up Program

EVGA nForce 780i SLITM FTW Quick Install GuideSTEP 1 - Install CPUThank you for purchasing an EVGA product. Please remember to register your product a

Kommentare zu diesen Handbüchern

Keine Kommentare

Evga force 780i SLI FTW Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Evga force 780i SLI FTW herunter. EVGA force 780i SLI FTW User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Evga force 780i SLI FTW